| Properties and applications of carbide blade |
| Grade | Density | T.R.S
MPa | Hardness HRA | Performance & application recommended |
| YG6 | 14.9 | 2150 | 90 | Good wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast iron. |
| YG6A | 14.9 | 1860 | 92 | Has wear resistance higher than YG6, used for processing hard wood, original wood, aluminum section bar, brass rod and cast iron. |
| YG8 | 14.7 | 2320 | 89.5 | Wear and percussion resistance , used for processing hard wood, soft wood, ferrous and non-ferrous. |
| RX2T | 14.5 | 2350 | 92 | Fine carbide, High wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc. |
| RX25 | 14.5 | 2150 | 92.2 | Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous,metal and non-metallid materials. |
| Other grades of strips may be offered according to customers' requirement. |
Application of TC tungsten carbide scraper blade for cleaning conveyor belt
It can be used in many field such as woodworking, machining of refractory alloys, stainless steel, High manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc.
Company introduction
Zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of 2001 with the investment of RMB 40 million. We have up-to-date production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten carbide hometown , convenient transportation, from changsha airport just 40 minutes, wuhan just 1.5 hour, from guangzhou just 2 hours. A favorable peripheral environment for cemented carbide manufacturing provides a natural barrier. Convenient traffic for tomorrow's internationalization laid a wide road.
Why choose us ?
1.Professional Manufacturer for more than 20 yeas experience.
2.ISO 9001-2008 Quality Control System .
3.100% virgin tungsten carbide .
4.OEM,ODM project accepted .
5.All payment terms supported .
6.Fast delivery time & Convenient Transportation .
Production
1, First all all ,carbide knives will start to prepare the RTP powder as per customer’s requirement with our wet-grinding ball milling machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of carbide strip samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all carbide strip blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the carbide strip look more beautiful.
2).The carbide strip can be ground according to customers’ order to a tolerance of +/-0.05
Feel free to contact me if any needs:
Whatsapp/wechat/phone:008618593402651
Facebook:Xiao Aimee
zhuzhou mingri cemented carbide co. ltd
Email:mr009@mrcarbide.com
